天仙blog

armbian rtp2httpd

Sat, 31 Jan 2026 12:37:13 +0800

添加命令

-r end0.102 -l 8888

win11选择其他应用没反应

Tue, 16 Dec 2025 17:29:27 +0800

复制以下2个reg文件并运行

1.reg

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Unknown\shell\openas]

@=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,35,00,33,00,37,00,36,00,00,00

"MultiSelectModel"="Single"

[HKEY_CLASSES_ROOT\Unknown\shell\openas\command]

@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4f,00,70,00,65,00,6e,00,57,00,69,00,74,00,68,00,2e,00,65,00,78,00,65,00,20,00,22,00,25,00,31,00,22,00,00,00

"DelegateExecute"="{e44e9428-bdbc-4987-a099-40dc8fd255e7}"

2.reg

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Unknown\shell\OpenWithSetDefaultOn]

"MultiSelectModel"="Single"

"ProgrammaticAccessOnly"=""

[HKEY_CLASSES_ROOT\Unknown\shell\OpenWithSetDefaultOn\command]

@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,4f,00,70,00,65,00,6e,00,57,00,69,00,74,00,68,00,2e,00,65,00,78,00,65,00,20,00,2d,00,6f,00,76,00,65,00,72,00,72,00,69,00,64,00,65,00,20,00,22,00,25,00,31,00,22,00,00,00

"DelegateExecute"="{e44e9428-bdbc-4987-a099-40dc8fd255e7}"

获取移动光猫超级密码

Tue, 16 Dec 2025 17:28:47 +0800

一用光猫背后的普通账号登陆光猫后输入http://192.168.1.1/getpage.gch?pid=1002&nextpage=tele_sec_tserver_t.gch
开启telnet，账号为CMCCAdmin密码为aDm8H%MdA

二电脑cmd命令输入telnet 192.168.1.1，登陆账号密码同上，依次输入以下命令即可
sidbg 1 DB decry /userconfig/cfg/db_user_cfg.xml

cat /tmp/debug-decry-cfg | grep Pass
账号密码就会显示出来

telnet 192.168.1.1

CMCCAdmin
aDm8H%MdA

sidbg 1 DB decry /userconfig/cfg/db_user_cfg.xml
cat /tmp/debug-decry-cfg | grep Pass

rT9y2@SC

CMCCAdmin
E*7Nj1Tm9

armbian udpxy

Tue, 16 Dec 2025 17:27:04 +0800

1.光猫设置单线复用，与海纳思一致
2.armbian中分离网络

sudo ip link add link end0 name end0.102 type vlan id 102
sudo ip addr add 169.254.0.1/32 dev end0.102
sudo ip link set end0.102 up

自启动脚本

sudo tee /etc/systemd/system/vlan102.service <<'EOF'
[Unit]
Description=VLAN 102 for IPTV
After=network-pre.target
Before=network.target

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/ip link add link end0 name end0.102 type vlan id 102
ExecStart=/sbin/ip addr add 169.254.0.1/32 dev end0.102
ExecStart=/sbin/ip link set end0.102 up

[Install]
WantedBy=multi-user.target
EOF
sudo systemctl enable vlan102.service

3.装 igmpproxy 并写配置

sudo apt install igmpproxy -y

sudo tee /etc/igmpproxy.conf <<'EOF'
quickleave
phyint end0.102 upstream ratelimit 0 threshold 1
    altnet 0.0.0.0/0
phyint lo downstream ratelimit 0 threshold 1
EOF
sudo systemctl enable --now igmpproxy

4.启动 udpxy 指向 VLAN 102

sudo udpxy -m end0.102 -p 4022 -a 192.168.x.x -B 2M -c 100

利用海纳思实现udpxy

Tue, 16 Dec 2025 17:25:07 +0800

1.光猫设置
我的光猫是移动H2-3e,将光猫的lan3通过vlan绑定到IPTV和网络，我网络的VLAN ID是101，IPTV是102，于是绑定时添加101/101，102/102
2.NAS设置
NAS 里面主要是网络的设置，

# 产生 eth0.102
vconfig add eth0 102
# 拉起接口
ip link set eth0.102 up
#获取ipv4
dhclient -v eth0.102 &

vconfig 方法会有警告提示，所以自动化脚本换了

自动化的脚本，只需要处理102这个iptv的vlan id 就可以了

1.生成可用脚本

cat > /usr/local/bin/vlan102.sh <<'EOF'
#!/bin/sh
# VLAN 102 自启动脚本（通用 Linux）
IF=eth0.102
VID=102
PIDF=/var/run/dhclient.${IF}.pid

case "$1" in
  start)
        ip link show "$IF" >/dev/null 2>&1 && {
            ip link set "$IF" down
            ip link delete "$IF"
        }
        ip link add link eth0 name "$IF" type vlan id "$VID"
        ip link set "$IF" up
        dhclient -nw -pf "$PIDF" "$IF"
        echo "VLAN 102 interface started."
        ;;
  stop)
        [ -f "$PIDF" ] && kill $(cat "$PIDF") 2>/dev/null
        ip link set "$IF" down 2>/dev/null
        ip link delete "$IF" 2>/dev/null
        echo "VLAN 102 interface stopped."
        ;;
  *)
        echo "Usage: $0 {start|stop}"
        exit 1
esac
EOF

2.赋可执行权限
chmod +x /usr/local/bin/vlan102.sh

3.开机自启
cat > /etc/systemd/system/vlan102.service <<'EOF'
[Unit]
Description=VLAN 102 interface
After=network-pre.target

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/local/bin/vlan102.sh start
ExecStop=/usr/local/bin/vlan102.sh stop
StandardOutput=journal

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl enable --now vlan102.service

4.确认状态(可选)
systemctl status vlan102.service

5.手动测试(可选)
/usr/local/bin/vlan102.sh start   # 立即拉起
/usr/local/bin/vlan102.sh stop    # 关闭清理

3.NAS里安装udpxy,通过docker安装，我安装的是docker.1ms.run/lordpedal/udpxy:latest，
4.udpxy配置，启动参数添加-m eth0.102

adb shell 添加系统证书

Tue, 16 Dec 2025 17:19:29 +0800

# 打开adb 脚本
adb shell
# 挂载磁盘
mount -o rw,remount /system
# 复制证书
cp /storage/emulated/0/Download/Reqable/2a50e10a.0 /system/etc/security/cacerts/
# 退出adb脚本
exit
# adb拿证书
adb pull /data/misc/user/0/cacerts-added/证书
# adb存证书
adb push 证书 /system/etc/security/cacerts/
# 设置权限644
chmod 644 2a50e10a.0

欢迎使用Z-BlogPHP！

Tue, 16 Dec 2025 17:11:23 +0800

欢迎使用Z-Blog，这是程序自动生成的文章，您可以删除或是编辑它:)

系统生成了一个留言本和一篇《欢迎使用Z-BlogPHP！》，祝您使用愉快！